KINGBOLEN K8 IMMO OBD2 Car Key Programming Tool and Vehicle Diagnostic Tool - 2 Year Update

KINGBOLEN K8-IMMO scanner is specially designed as a complete immobilizer programmer. It can work with VCI (Vehicle Communication Interface) dongle to perform comprehensive diagnostics of car models and complete systems (including reading and clearing diagnostic codes, reading data streams, etc.

KINGBOLEN K8-IMMO scan tool for all vehicles is equipped with Android 10.0 operating system, 2.0GHz/4-Core high-efficiency processor, 4GB RAM+64GB ROM and a high-quality battery (6300MAH) , which guarantees stable and fast diagnostics. KINGBOLEN K8-IMMO Diagnostic Scanner key programmer incorporates powerful IMMO anti-theft matching, FOB key programming, full system diagnostics with 2-year update, 24+ maintenance functions, etc.

IMMO anti-theft matching:

This function allows you to perform the anti-theft key matching function, so that the car immobilizer identifies and authorizes the remote control keys to use the car normally.

1. IMMO matching function: PIN code reading, key generation, key learning, remote learning, key matching, IMMO ECU reset/adapt, IMMO data save/restore, used radio unlock, etc.

Key programming:

• This function allows you to save data from old keys, write new ones and detect the frequency of the remote control. The immobilizer programmer is required to perform this operation. It has the following functions: a: Read transponder data (for Mercedes Benz infrared smart key) and generate unique keys. b: Read/write on-board EEPROM chip data and read/write MCU/ECU chip data. Read/write remote control transponder data and detect key frequency.
• 2. Programming function: adding/removing key fobs, relearning keys, disabling lost keys, reading/writing EEPROM, reading/writing MCU, reading/writing IMMO, reading/writing motors, etc. Provides guided functions with step-by-step instructions for learning keys, learning remotes and adding remotes, etc.

Gearbox programming:

• This function allows you to restore the old gearbox data or enter new ones after replacing the gearbox. The immobilizer programmer is required to perform this operation. There are two types of gearbox control unit replacement, and the user can choose the corresponding solution according to the actual situation.
• Situation 1 - The data from the gearbox control unit of the original vehicle are readable. The data is not corrupted and the change can be cloned. In this case, you just need to backup the EEPROM and FLASH of the original gearbox, and then restore them to the gearbox ECU for replacement.
• Situation 2 - The vehicle's original gearbox ECU data is illegible or damaged. In this case, you need to backup the ECU EEPROM for replacement, then manually enter the original CS code or get the original CS code from the original key.
• Engine programming:
• This function allows you to read engine data and write backup data after replacing a new engine.
• To perform this operation you need the immobilizer.

KINGBOLEN K8-IMMO 8 inch OBD II Key Program Car Diagnostic Case and Excellent Configuration

As a standard anti-theft device, a car immobilizer can significantly reduce the chances of your car being stolen when it is working properly. If you have lost or damaged your keys, the KINGBOLEN K8 IMMO diagnostic tool can fix the problem, saving you time and money.

IMMO remote control programming: IMMO Anti-theft Matching by K8-IMMO What can you do? Adding new keys for used cars

• Replace the broken IMMO ECU module.
• Delete the data from the lost key control unit
• Reset the replaced IMMO control unit.
• PIN Code Reading: This K8-IMMO scan tool can read the IMMO PIN code of your vehicle if all your keys are lost. Compatible with for Peugeot for Citroën, for GM, for Nissan, for Hyundai, for Kia, etc.
• Erase/Add/Lose All Keys: The K8-IMMO scanner allows you to erase key information, add new keys and process all lost keys.
• Key learning/pairing: Reads the key data from the ECU module and resets/pairs the new key with the IMMO ECU. Compatible with for Ford, for GM, for Mercedes-Benz, for BMW, for VW/for Au-di, for Porsche, for Peugeot for Citroën, for Land Rover Jaguar, for Honda, for Toyota, for Nissan, for Hyundai, for Kia, etc.
• Clearing form data: Clears information and data from the key form to allow pairing with new keys.
• Module Replacement: Compatible with for BMW, for Mercedes-Benz, for VW/for Au-di, for Honda, for Nissan, for Hyundai, for Kia, etc.
• IMMO ECU Reset: Restores the ECU with the vehicle after a replacement or repair.

Cloning of the engine and gearbox ECU : cloning the ECU can solve problems that the coding functions (programming, initialisation, anti-theft pairing) cannot resolve when the module is replaced. This cloning function allows you to clone/save the original vehicle data into the new module and complete the replacement and direct use. NOTE: IMMO key programming is not universally compatible. It is strongly recommended that you send the VIN/BRAND/MODEL/YEAR to check compatibility.

KINGBOLEN K8-IMMO Advanced diagnostic tool with comprehensive two-way controls, advanced ECU coding and FCA AUTOAUTH

The two-way control test (active test) is a function commonly used by mechanics and workshops. It can save a lot of time and money by sending a command to the vehicle's ECU to perform a component test to verify the operation of the actuator and quickly locate faulty parts without dismantling the vehicle.

Fuel pressure control valve, fuel regulator, injector test, injector hum test,

Cylinder deactivation, air conditioning compressor clutch relay on/off, ABS pump engine cycle,

Raise/lower the windows/doors/roof of the car,

Cooling fan motor check, interior lighting test, high beam test.

EVAP Test: EVAP Purge Solenoid Valve, EVAP Vent Solenoid Valve, EVAP Purge/Seal.

KINGBOLEN K8-IMMO Car Diagnostic Tool Advanced ECU Coding / Online Coding allows you to unlock hidden functions, customize car settings, improve vehicle capacity, match components and restore adaptive data, etc.

For example:

Deactivation of the seat belt reminder, folding rear-view mirror,

Automatic engine start, Automatic lock/unlock function,

Deactivating the daytime lights, Deactivating the seat belt alarm,

KINGBOLEN K8-IMMO Full 10 OBD II Modes + 24 Common Services

[KINGBOLEN K8-IMMO scanner is a diagnostic tool that supports comprehensive diagnosis of the basic functions of 10 OBDII standard modes to ensure complete and accurate system diagnosis.

24+ daily maintenance functions to protect your car!

• Oil Reset Service: This feature allows you to reset the engine oil life monitoring system, which calculates an optimal oil change interval based on driving conditions and vehicle climate.
• Resetting the steering angle calibration (SAS): To reset the steering angle, replace the steering angle position sensor, replace the mechanical parts of the steering, recover the body, you need to reset the steering angle .
• Electronic Parking Brake (EPB) Reset: If the brake pad wears the pad sensing line, you need to replace the brake pad. After replacing the brake pad, you need to reset the brake pad. Otherwise, the car will go into alarm.
• ABS Bleed Reset: This function allows you to perform various bidirectional tests to verify the operating conditions of the ABS. If the ABS contains air, it is necessary to perform the ABS bleed function to restore the ABS brake sensitivity. Resetting the Tire Pressure Monitoring System (TPMS): This feature allows you to quickly look up tire sensor identifiers from your vehicle's ECU, as well as replace the TPMS and test the sensors.R
• carry out gear learning: if gear learning has not been carried out, the MIL turns on after starting the engine. Once the gear has been successfully learned, the MIL turns off.
• nitialization of the electronic throttle position (Throttle Matching)：This function allows you to make the initial settings of the throttle actuators and to restore the learned values ​​stored in the control unit to the default state.R
• injector coding reset：Write the actual injector code or rewrite the code into the ECU according to the corresponding cylinder's injector code, in order to more accurately control or correct the injection quantity of the cylinder.
• IMMO Service Reset: This function allows you to perform the anti-theft key matching function, so that the car immobilizer identifies and authorizes the remote control keys for normal car use.
• l Battery maintenance system (BMS) reset, transmission reset, sunroof reset, suspension calibration, window calibration, seat calibration, tire reset, language change reset, NOx sensor reset, start/stop reset, A/F ratio reset, coolant purge reset, transport mode reset, etc. they are all available and constantly increasing. they are all available and constantly increasing. Other special functions are available in the system menu.

NOTE: Special features vary from vehicle to vehicle and DO NOT work on all vehicles. Please come to us with the make/model/year/vintage of your vehicle to check compatibility before purchasing.

Full OE Level System Diagnostics + Auto VIN + Google Navigator + 4 in 1 Live Data Graph + 25 Languages

[KINGBOLEN K8-IMMO Automotive Scanner provides OE-level access and diagnostics on all available vehicle modules, including but not limited to PCM, ECM, EPS, PDM, BCM, TPM, etc. and covers all major electronic systems such as engines/automatic transmission/airbag/immobilizer/key coding/ABS/cruise control/self-leveling suspension systems. and covers all major electronic systems such as engines / automatic transmission / airbag / immobilizer / key coding / ABS / cruise control / self-leveling suspension systems / seats / doors / walkway / steering angle / air suspension / body systems / electronic power steering / tire pressure / intelligent parking system / door motors / audio systems / air conditioning / service oil reset / sliding doors / electronic accelerator. . and much more.

[KINGBOLEN K8-IMMO is an OBD II diagnostic tool that can automatically detect vehicle information, scan and read ECU version information with just one click. (Note: Not all cars support automatic VIN scan function; if necessary, you can manually enter the vehicle's VIN number for scanning and diagnosis.)

[KINGBOLEN K8-IMMO car scan tool comes with a built-in browser that can help you quickly search the meaning of the fault code or search for other questions and information you want to know.

[View real-time data and parameters from multiple sensors in text and graphical form, so you can monitor the operating conditions of electronic components in real time for easy troubleshooting.

[Checking Battery Voltage] Check your vehicle's battery voltage regularly, not just when the battery starts to show signs of weakness. You can use the KINGBOLEN K8-IMMO car scanner to check if your system is working properly. And change or replace the battery when it drops below the normal value.

[25 freely editable languages ​​] Includes English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish, Persian, Romanian, Serbian , Swedish, Thai and Traditional Chinese. The use of 25 languages.

[It can be used anywhere and you can also choose the operating interface language you prefer.

KINGBOLEN K8-IMMO Diagnostic Outlet HIGH-END HARDWARE CONFIGURATION OFFERS SUPER CAPACITY

Technical parameters:

CPU: 4-Core 1.8GHz - Screen size: 8 inches (1280*800 pixels) - Camera: 8MP rear camera - Memory: 4GB + 64GB - Working voltage: 5V

Americas: Compatible with for Ford, for GM, for Chevrolet, for Chrysler, for Jeep, for Buick, for Cadillac, etc.

Europe: compatible with for BMW, for Benz, for Audi, for Rolls-Royce, for Volvo, for VW, for Land Rover, for Vauxhall, for Smart, for Skoda, for Seat, for Saab, for Abarth, for Alfa Romeo, for Citroën, for Dacia, for Mini, for Opel, for Peugeot, for Porsche, for Renault, for Fiat, for Jaguar, for Lancia, for Sprinter, for Mercedes, etc.

Asia: Compatible with for Toyota, for Honda, for Hyundai, for Subaru, for Suzuki, for Lexus, for Nissan, for Mazda, for Mitsubishi, for Acura, for Isuzu, for Kia, for Daihatsu, for Daewoo, for Samsung, etc. .

Matching Components: Compatible with for Volkswagen / for SKODA / for Seat / for BMW / for GM / for Ford / for Opel / for Mazda / for Fiat / for Honda / for Nissan / for Hyundai / for KIA / for Subaru etc.

Online Coding: Compatible with for Volkswagen / for Audi / for Benz / for BMW / for Seat / for Porsche etc.

Online account connection service: compatible with for Volkswagen / for Audi / for SKODA / for Seat etc.

Online Calibration: Compatible with for Volkswagen / for Audi / for SKODA / for Seat etc.

Online parameterization: compatible with for Volkswagen / for Audi / for SKODA / for Seat etc.

Key Programming: Compatible with for Volkswagen / for Audi / for SKODA / for Seat etc.

Guided functions (the most popular): Compatible with for Volkswagen / for Audi / for SKODA / for Seat etc.

Programmable module installation: compatible with for FORD / for MAZDA etc.

Power Balance: Compatible with for FORD / for GM / for CHRYSLER etc.

NOTE: It supports vehicle diagnostics for Chrysler, for Jeep, for Alfa-Romeo and for Fiat after 2019, but only provides AutoAuth login. You need to purchase a registration number from the official AutoAuth website and log in to use it.