LAUNCH CRP919E ALL-IN-ONE SCAN TOOL - Launch CRP Series Full System Scan Tool

LAUNCH CRP919E diagnostic scan tool will provide your car with a complete detection as it can read/clear DTCs and display live data and service functions for ALL systems, such as: Engines / Automatic Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self-Leveling Suspension Systems / Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Power Assisted and Motor Assisted Steering / Power Steering / Tire Pressure / Rain Sensors / 4WD System / Stabilizer / Intelligent Parking Assistant / Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti-Theft / Soft Top / Headlight Leveling / Central Locking / Auto Clutch / DPF Reset / Power Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Washer / Heater Fuel / Transfer Case / Seat Memory / Oil Life Service Reset / Sliding Doors / Accelerator electronic / Navigation system / Rollover sensor / Cruise Control / Multifunction steering wheel / Auxiliary heating / Electronic parking brake / Clutch electronics, .... etc. (MORE THAN 100,0000 CAR OWNERS AND MECHANICS First choice)

Powerful feature just released in 2024: Two-way control (active test)

2024 LAUNCH CRP919E OBD2 Diagnostic Newly added bidirectional/active test to match full system diagnosis, significantly reducing diagnostic time!

Bi-directional Control : It supports bi-directional control capability to send command to vehicle ECU for active/component testing to check its functionality which can accurately determine whether a specific system, component or subsystem in vehicles is working well.

FOR EXAMPLE: If the failure of the vapor emission system may be due to the EVAP purge valve opening or closing after being stuck or shorted, you can use our LAUNCH CRP919E scanner to send the command to the vehicle's ECU for EVAP test, then diagnose the DTC and read the data stream. You can determine which part of the circuit, control unit and actuator fails by comparative analysis.

• Commonly used active tests including:
• EVAP purge/vent electronoid;
• Fuel Injector Test;
• A/C cyclic clutch relay;
• ABS cycling pump;
• Cooling fan test;

Window / light / door lock / headlight test / moonroof / operate mirrors / turn on horn sound;

And it can also perform other performance test functions, such as modulate throttle, turn off ACC Lane Keeping Assist System (LKAS); Turn on/off front and rear ACM solenoid, Left clutch electromagnetic coil test, Acceleration device test, DYNAMIC camera pointed oil pressure control test, Brake vacuum pump, Inlet and outlet valve test, Open brake test, Parking brake motors, Wheel speed sensor Power supply, Parking brake test, etc. (Performance test functions vary depending on the vehicle system)

LAUNCH CRP919E OBD2 Multi-Brand Diagnostic Scanner Supports 31 Reboot Services

✔ 3 Newly added features in CRP919E compared to CRP909E:

• EGR Reset: EGR adaptation is used to learn the EGR (Exhaust Gas Recirculation) valve after cleaning or replacement.
• HVOLBAT Reset: High voltage battery detection is used for high voltage battery diagnostics and status information detection.
• ENGPBM Reset: Cylinder Power Balance Test can help uncover hidden engine problems related to engine misfires, lack of power, or just a bad running engine that is commonly overlooked with other tests. Therefore, testing the cylinder power balance is one of the best and easiest ways to find the source of an engine misfire. Additionally, the cylinder power balance test is often used in conjunction with cylinder compression and leak tests to better identify the problem.

More service functions for quick maintenance: Shift Reset, Gear Learning, Suspension, Moonroof, Headlight, A/F Reset, AC Relearn, Coolant Bleed, Language Change, NOx Sensor Reset, Seat Reset, Stop/Start Reset, Transport Mode, Tire Reset, Windows Calibration, etc. and continues to grow. (NOTE: Service features vary by vehicle make, model and year. Submit your VIN to check compatibility.)