Full System Diagnostic Tool---2021 NEWEST THINKCAR THINKSCAN MAX

THINKSCAN Max，One of the diagnostic products launched by THINK CART ECHINC，is the highest level OBD product in THINK series for DIY users. Equipped with Android operating system, it is equipped with powerful functions and can be updated online. Furthermore, the comprehensive communication protocols cover a wider range of vehicle models.

Why choose ThinkCar ThinkScan MAX?

• Comprehensive system diagnostics for 123 car brands
• Engine, Transmission, ABS, SRS System Diagnostics + OBD2 10 Modes
• 28 Maintenance Reset Functions
• Activation test, two-way test and ECU coding holders (Note: you need to purchase additional)
• Equipped with intelligent diagnosis to automatically identify the VIN.
• Android system can be updated online.
• THINKCAR series design, dust-proof, shockproof, easy to store

ThinkCar ThinkScan Max supports the complete system of cars

Engines / Automatic transmission / Airbag / Immobilizer / Key coding / ABS / Cruise control / Instruments / Self-levelling suspension systems / Seats / Doors / Gateway / Steering angle / Air suspension / Body systems / Electronic and servo-assisted power steering / Power steering / Pneumatics Pressure / Rain Sensors / 4WD System / Stabilizer / Intelligent Parking Assistance / Door Motors / Audio Systems / Air Conditioning / Sliding Doors / Electronic Throttle / Navigation System / Tilt Sensor / Cruise Control / Multifunction Steering Wheel / Auxiliary Heating / Electronic parking brake / Clutch electronics etc.

>>>>Active test and bidirectional control: bidirectional control capability and is capable of active testing to access vehicle-specific subsystems and component testing. The tester sends commands to the ECU to drive the actuators to determine the integrity of the system or parts by reading ECU data or monitoring the operation of the actuators

>>>>ECU coding: the coding function is used to recharge the vehicle control modules, allows you to reprogram adaptive data for some components after making repairs or replacements. providing ways for problems with drivability, fuel efficiency, power loss, fault codes, life of mechanical parts.

Note: You need to purchase them additional, Cost: 49.95usd/year (you can buy directly from ThinkCar Store) for one function such as: ECU coding/actuation testing and other special functions.

>>>>History of diagnosis: OBDII scanner will record every step during car diagnosis, helps you enter a previously tested vehicle and continue its test without starting again

>>>>Customer management: you can add workshop information in the setting, your customer's vehicle diagnostic information will be stored in turn, which helps you better management.

THINKCAR ThinkScan Max has 28 service functions that allow you to reset various systems in your vehicle

1. Oil Reset： The car maintenance light turning on indicates that the vehicle needs maintenance, reset the mileage or driving time after maintenance, this will cause the maintenance light to turn off and the system will start a new cycle of maintenance. maintenance.
2. Throttle Adaptation： Throttle adaptation is to use the car's decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state. Thus, the movement of the throttle throttle (or engine idle) can be controlled more accurately, then adjust the intake volume.
3. Resetting the steering angle： To reset the steering angle, first find the relative zero point position for the car to drive in a straight line. Taking this position as a reference, the ECU can calculate the precise angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts (such as gearbox, steering column, final tie rod, steering knuckle), performing four-wheel alignment or recovering the bodywork, it is necessary reset the steering angle.
4. Battery Matching： This function allows you to perform a reset operation on your vehicle's battery monitoring unit, in which the original low battery fault information will be erased and battery matching will be performed.
5. ABS Bleeding： When the ABS contains air, it is necessary to perform the ABS bleed function to bleed the brake system and store the ABS brake sensitivity. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line or brake fluid are replaced, it is necessary to perform the ABS bleed function to bleed the ABS.
6. EPB Reset： It is important for maintaining the safety and efficiency of the electronic braking system
7. DPF Reset： Specially works for diesel particulate filter system with DPF regeneration, self-learning for DPF component replacement and DPF self-learning after replacing the engine control unit.
8. Gear Learning： The scan tool monitors certain signals from the camshaft position sensors to determine if all conditions are met to continue with the engine operating procedure
9. IMMO Service： To prevent the car from being used by unauthorized keys, the anti-theft key matching function should be performed so that the immobilizer control system on the car identifies and authorizes the remote control keys for normal use of the car. car.
10. Injector Coding： Write the actual injector code or rewrite the code in the ECU with the corresponding cylinder injector code so as to control or correct the injection quantity of the cylinder more accurately. After replacing the ECU or injector, the injector code of each cylinder needs to be confirmed or recoded so that the cylinder can better identify the injectors to precisely control the fuel injection.
11. TPMS Reset： After the tire pressure MIL is turned on and maintenance is performed, you need to perform the tire pressure reset function to reset the tire pressure and turn off the tire pressure MIL. Tire pressure reset should be performed after performing maintenance in the following cases: tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, sensor tire pressure is damaged and the tire is replaced for the car with tire pressure monitoring function.

And other reset functions: suspension matching; AFS recovery; A/T learning; Sunroof initialization; EGR adaptation; Reset ODO; Airbag reset; Mode of transport; Reset A/F; Reset Stop / Start; NOx sensor reset; Seat calibration; Coolant bleeding; Tire reset; Windows Calibration; Language change

Thinkcar thinkscan MAX OBD2 Scanner Specifications

• 5.99 inch touch screen
• WIFI, BLUETOOTH connection
• Android system
• 2G RAM / 16G storage, 3100Mah battery capacity

What will you get?

1. Thinkscan MAX portable
2. Diagnostic dongle
3. Charging cable
4. Power adapter
5. User Manual

Support car list:

For ASTONMARTIN, AUDI, AUSTFORD, AUSTHOLDEN, BAIC, BENZ, BMW, BXFIAT, BXGM, CHANGAN, CHANGCHENG, CHANGHE, CHRYSLER, CITROEN, DAEWOO, DAIHATSU, DFXK, For DR, for FERRARI, for FIAT, FLYER, for FUTIAN, for GAZ, for GM, for HAFEI, for HMAZDA, for HONDA, for HUACHEN, for HYUNDAI, for IKCO, for INDIANMAHINDRA, for INDIANMARUTI, for INDIANTATA, for JMC, for IVECO, for IZH, for JACTY, for JIAO, for JINLONG, for JOYLONG, for ISUZU, for KIA, for LANDROVER, for LIFAN, for LIUWEI_TY, for LUXGEN, for MAHINDRA, for MALAYSIA PERODUA, for MALAYSIA PROTON, for MARUTI, for MASERATI, for MAXUS, for MAZDA, for MITSUBISHI, for MVM, For NISSAN, For OPEL, For PAZ, For PERODUA, For PEUGEOT, For PORSCHE, For PROTON, For QIRUI_TY, For QOROS, For RENAULT, For ROVER, For SAAB, For SAICMG, For SAIPA, For SEAT, For SEAZ, For SGM , for SKODA, for SMART, for SPARK_TY, for SPRINTER, for SSANGYONG, for SUBARU, for SUZUKI, for TATA, for TOYOTA, for TRUMPCHI, for UAZ, for USAFORD, for VAZ, for VOLVO, for VW, for XIALI, for XINKAI, for ZAZ, for ZHONGSHUN, for ZHONGTAI, for ZHONGXING